You might find yourself reading news about a fire caused by LPG in Singapore here and there. When people neglect even the most minor details, it can lead to negative consequences.

According to the Singapore Fire Statistics report, the cause of fire in every household is due to dropped light, overheating of food due to fuel ignition, failure of electrical supplies due to exposed wires. Data shows that most people leave their stoves unattended when cooking, which causes fire to spread rapidly.

Residential places number one cause of the fire is the accumulation of fugitive gas supply in Singapore, accounting for over 1 out of 5 people for burn injuries. It often begins in leaks that escape through gaps and openings that cause ignition when left unchecked.

Surprisingly, rather than being caused by the volatile nature of LPG, these incidents are frequently the result of carelessness and negligence in handling. In this case, knowing the right do’s and don’ts should be a priority for every owner.

LPG Safety Tips For Every Owner

Liquified petroleum gas (LPG) is a combination of 60% butane and 40% propane. It is made through the distillation of crude oil during the refining, in the same way as other fuels such as kerosene, gasoline, and diesel obtained through oil extraction.

You must use

LPG in Singapore following the safety precautions provided by the supplier. Blasting, fire risk, property destruction, and, most importantly, death or severe injury can result from improper LPG handling and storage.

LPG Appliances

It is crucial to take note to choose devices that the BIS has approved constantly. It would be best to use only certified providers to get rubber tubes and LPG regulators approved by the BIS.

Every gas cylinder maker in Singapore must get clearance from the Petroleum and Explosives Safety Organization (PESO) and a BIS license to manufacture and sell cylinders in an authorised manner. Through a site visit to a manufacturer’s manufacturing facility, the Bureau determines whether or not the manufacturer’s manufacturing infrastructure, production method, quality standards, and testing procedures are sufficient.

In buying LPG

In the process of purchasing your LPG, inspect your gas cylinder in Singapore to make sure that the business seal and safety cap fastens firmly. Moreover, if you have any questions about the technique, please do not hesitate to contact the delivery man to explain it.

Remember that installing your LPG cylinder at ground level on a flat surface is the best option, and dragging, rolling, and dropping the cylinder are all regular occurrences.

Please verify the side of the industrial LPG gas cylinder plate for the testing deadline, printed on the inside of the container. You can see the due date indicated by an alphabet reflecting the quarter and year.

Do’s and Don’t To Take Note

When using LPG

Ensure all of the doors and windows in your kitchen are open to allow for optimum air circulation.
Avoid putting flammable or plastic goods close to the heat source.
Never leave your food alone while it is cooking.
Dress in clothing that will not easily cause fires.
When the cylinder is not in use, turn the regulator knob to the OFF setting.

Daily regulations

You should check for cracks in rubber tubes regularly.
Replace the rubber tube every two years at the very least.
Keep the safety cap in place by attaching it to the cylinder with nylon thread.
If there is a leak, secure the valve cap to prevent it from leaking. Make safety a priority.
When you’re cooking, always wear a cotton apron.
Do not store the cylinder in a closed compartment, and keep the stove on a platform or table higher than the cylinder’s elevation.
Applying a soap solution to the cylinder valve and other joints will help you determine any leaking before using it.
When the cylinder is not attached, place the cap on the valve.
Always maintain the cylinder vertically with the valve on top, and put it at ground level on a level surface to avoid any potential problems.
It would help if you do not position a cylinder near a heat source and unexposed to the elements such as sunlight, water, dirt, or heat.
For cylinder valve regulators to be employed, they must have the same diameter as the cylinder valves themselves.

Leaks Solutions

Do’s

Completely open all of your doors and windows.
If the regulator is now in the ON position, try to turn it off if possible.
You should place the safety cap immediately if the leak is coming from the valve.

Don’ts

Do not turn on or off any electrical equipment in the house unless necessary.
Do not use matches, lighters, stoves, or other similar devices.
Move the cylinder to a well-lit area and call the supplier or the local emergency unit to report the situation.

Home Safety Measures

As mentioned above, cooking on unattended gas burners is the most common cause of kitchen fires. If your gas stove is not in use, make sure you turn it off. It is the most basic regulation that you must remember at all times.

Make sure that you have your equipment serviced consistently. Qualified personnel should perform the servicing and frequent maintenance checks completed in every LPG gas delivery and installation. Know the safety protocols by asking for a guide you can keep in case of emergency, it will help to keep you informed on what you should know about your LPG gas.

When working with LPG cylinders, be sure you’re utilising the most up-to-date and appropriate equipment. Check out the suggested brands in the marketplace to prevent purchasing poor equipment. Also, inspect the equipment before each usage to ensure it is in good working order. Most importantly, avoid utilising canister seals that are cracked or rusted to prevent gas leaks in the future.

Choose SingGas

Prevent any future problem and purchase LPG in Singapore in compliance with local health and safety regulations. Consider the expertise of SingGas who offers their customers professional and local solutions.